Tri-Ax

[BLK2003GT]

Hey guys I was on the steeda site and i was looking for a tri ax shifter and there were a bunch of different ones and i wasnt sure which one i should get for the 03 GT. also if there is a better place to get it from, where? cause i know its sometimes its not good to order right from the maker. and i also wanted to know if one of you guys could help me install it beause i dont know too much about that stuff. thanks for the help

Derrick

[Luke01GT]

Hey guys I was on the steeda site and i was looking for a tri ax shifter and there were a bunch of different ones and i wasnt sure which one i should get for the 03 GT. also if there is a better place to get it from, where? cause i know its sometimes its not good to order right from the maker. and i also wanted to know if one of you guys could help me install it beause i dont know too much about that stuff. thanks for the help

Derrick


consult GTCarrao on this one he just put one in

[HORSEpower]

Shifters are real easy to do. On T-3650s you usually have to get under the car and knock the plate loose with a screwdriver. Still only takes 45 minutes at the most to install. Steeda's over the counter prices are pretty competitive.

Kurt

[Mr.Nitrous]

Shifters are real easy to do. On T-3650s you usually have to get under the car and knock the plate loose with a screwdriver. Still only takes 45 minutes at the most to install. Steeda's over the counter prices are pretty competitive.

Kurt
And I thought you said your the mustang guy.Get under the car?WTF!

[HORSEpower]

And I thought you said your the mustang guy.Get under the car?WTF!

Yeah, some of the newer stangs, the shifter won't jiggle loose from the tranny. You have to get under the car and tap the shifter plate with a screwdriver and hammer to break the seal.

Kurt

[BLK2003GT]

Thanks for all the help, I'm probably gonna order it tonight or tomorrow so it can go on the car soon.

Derrick