03 cobra 0-160mph vid

[Mr. Bueno]

03 cobra punching it pretty hard, slacking on the shifts. 0-160mph

right click and enjoy


http://www.nothingelseleft.com/cobra/videos/0-160%20KBcobra.wmv

Tim

[4U 2 NV]

man listen how fast 1st gear revs up. I hair under 25 seconds to 1-160. Not bad!!! Love that blower whine!

[Mr. Bueno]

yea
and it is about 0-100 for 10secondish.
also he only winded it out 5gears, still had 1 more gear left. just crazy.

just think if he had a 100shot? :beer:
TIM

[camarossguy2]

First gear up to 26??? that car was either gears up, or the PCM was programmed to a different ratio to fool the speedo. My car with 3.42 goes up to 39-42 mph in first, 26 seems low. something is not right

[Brazen6.0]

for some odd reason it looks fake, like if he was on a dyno doing that or something....could be juet me...sounded bad ass

[HORSEpower]

Yeah, that definately seemed like it was done on the dyno.

Kurt

[Luke01GT]

doesn't look fake to me, I can see the reflection of trees on the dash glass. but I have to admit 1st gear wasn't all too impressive.

[Banshee365]

Yea, it's not fake. With the tree's and tire squeeling on the launch. Sounds like the stock Eaton M112 with a 2lb upper pulley. I'm sure it has quite a few other mods though, that's just my take since I've been driving with the same blower in my truck for 25,000 miles, it is sure wound up more than stock.

-Kelly

[Mr. Bueno]

yea it is definately on the road, you can hear the tires squeal, and notice the car's acceleration slowing after 140mphish due to aerodynamic drag.

Besides, wouldnt a car's speedo hardly slow down on the dyno if going through all the gears? Afterall, when we dyno our cars, it is done in 4th gear to redline, but he is losing acceleration up through the gears.

just my .02
Tim